Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Nitril reduction
11-17-2014, 12:12 PM (This post was last modified: 11-17-2014 12:12 PM by i.kovacs.)
Post: #1
Nitril reduction
We have received this question to askthechemist@thalesnano.com:

I was hoping that you might be able to make a recommendation of a suitable catalyst for the following transformation:

[Image: image004.png]


I was hoping to run this with Raney Nickel. I do see in the literature, the potential to use a Ni EnCat catalyst. Suggestions?

Raney Nickel might be a good catalyst for the reaction, however there is a chance that the reaction would reduce the pyridine ring as well.
You may try 10% Pd/C as well, but it also might cause some dearomatization.
I would recommend to use either the Raney Ni or 10% Pd/C but try to manage the reaction on as low pressure as possible.
Regarding the encapsulated Nickel, it is unfortunately not available, however if you have that type of catalyst, we are happy to fill it in a CatCart for you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Nitril reduction - i.kovacs - 11-17-2014 12:12 PM

Forum Jump: